◪ Using only 1 set of keyboard, mouse and monitor to control 4 PCs
◪ Support Unix/ Windows/ Debian/ Ubuntu/ Fedora/ Mac OS X/ Raspbian/ Ubuntu for Raspberry Pi and other Linux based system
◪ Support hot plug, connect or disconnect devices to the KVM switch at any time without turning off devices
◪ Support auto switching among all devices so as to monitor the devices in a specified time interval
◪ Support keyboard hot keys to control KVM switch
◪ Available to use keyboard without any delay after switch host devices
Support resolution up to 3840*2160@30Hz◪
◪ With extra standard USB port, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM just as you have plug these devices directly to computer
◪ Support IR control, easy to control KVM by remote control
◪ With EDID emulators in each input port, keep PCs always having correct display information
◪ Supports DVI-D single link sources and displays with the use of HDMI-to-DVI adapters
HKS0401A30 | 4x1 HDMI KVM Switch | |
Functionality: | ||
Auto Scan | Yes | |
Port selection | Front panel buttons | Yes |
Keyboard hotkeys | Yes | |
IR remote control | Yes | |
Console commands | No | |
Technical: | ||
Resolution | Up to 3840x2160@30Hz | |
Auto to get EDID | Yes | |
Data rate | 10.2 Gbps | |
Auto scan interval | 1~250 Seconds | |
Beep Sound | On/Off | |
OSD | No | |
Supported OS | Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/ Raspbian /Ubuntu for Raspberry Pi and other Linux based system | |
Console ports | Keyboard emulation | 1 * USB Type A |
Mouse emulation | 1 * USB Type A | |
USB 2.0 Hub ports | 1 * USB Type A | |
Video /Audio | 1 * HDMI Type A | |
RS232 | NA | |
LAN | NA | |
System ports | USB Data | 4 * USB Type B |
Video / Audio | 4 * HDMI Type A | |
ESD protection | Human body model - ±8kV (Air-gap discharge) | |
Mechanical: | ||
Chasing material | Aluminum Alloy | |
Product dimensions | 302 (L) x 120 (W) x 30 (H) mm | |
Item weight | 800g |
1 * 4x1 DVI KVM Switcher
1 * DC 12V Power Adapter
1 * IR Remote Control
1 * Quick-Start Guide
This 4x1 DVI KVM Switcher provides you with great flexibility in integrating cross-platform computer equipment easily. It makes you available to switch easily and reliably between any DVI-D computers using one DVI-D display.
The Switch supports USB 2.0 hub and USB 2.0 keyboard /mouse. By using USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode scanner or other USB devices to the KVM. Switching can be controlled through variable methods, such as the front panel source selector buttons, RS232 commands, IP commands, IR signals and hot keys on keyboard. With EDID emulators in
every input ports, keep PCs always have correct display information, prevent display settings changed
while switching input ports.
|
Copyright © 2021 Guangzhou Weyes Network Technology Co., Ltd. | All Rights Reserved